Canon Wireless File Transmitter WFT-E7A 매뉴얼
19
This section’s explanation follows the flow of the connection instructions. If an error is
displayed, see “Troubleshooting” in Chapter 10 (p.97) and check the settings.
displayed, see “Troubleshooting” in Chapter 10 (p.97) and check the settings.
Pressing the shutter button or other camera controls during configuration will cause the
connection instructions to close. Do not press the shutter button or other controls until
configuration is finished.
connection instructions to close. Do not press the shutter button or other controls until
configuration is finished.
In the menu, set [Auto power off] to [Disable]. If auto power off is activated, the connection
instructions close during the configuration process.
instructions close during the configuration process.
1
Turn on both the camera and
transmitter.
transmitter.
2
Display the transmitter menu.
On the camera, press the <7> button.
In the menu, select [Communication settings]
and press <0>.
and press <0>.
3
Select [Network settings].
4
Select [Connection wizard].
X
The [Select communication method] screen is
displayed.
displayed.
X
The <LAN> lamp on the transmitter starts blinking.
Displaying the Connection Wizard