Canon Wireless File Transmitter WFT-E7A 매뉴얼
71
Shoot with the master camera linked to slave cameras as follows.
1
Set up the master camera.
Configure the settings on the master camera
following steps 1-3 on the preceding page, and
then select [Master].
following steps 1-3 on the preceding page, and
then select [Master].
2
Select [Auto connect].
For [Manual connect] instructions, see page 75.
3
Set up the slave cameras.
On the slave cameras, select [OK].
4
Check the number of slave cameras.
X
On the master camera LCD monitor, the number of
slave cameras detected is displayed.
slave cameras detected is displayed.
5
Establish the connection.
On the master camera and all slave cameras,
select [OK].
select [OK].
X
A screen confirming the connection of the camera
is displayed.
is displayed.
Settings information is stored on the cameras. It is
not stored on the transmitters.
not stored on the transmitters.
Basic Linked Shooting