Canon Wireless File Transmitter WFT-E6A 매뉴얼
94
1
On the [53] tab, select [Communication
settings].
settings].
2
Select [Bluetooth device connection].
Once you have set [Communication func] to
[Enable], you can select [Bluetooth device
connection].
[Enable], you can select [Bluetooth device
connection].
X
Press <0> when the next screen shown below is
displayed.
displayed.
3
Select the GPS device.
Nearby Bluetooth® devices in use are listed.
Turn the <5> dial to select the GPS device, and
then press <0>.
then press <0>.
Select [OK] and press <0>.
If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.
GPS device, a password input screen is displayed.
Enter the password.
X
The transmitter now starts to establish a
connection with the GPS device.
connection with the GPS device.
It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
Connecting GPS Devices via Bluetooth