Canon vb-s31D 매뉴얼

다운로드
페이지 185
Performing Operations and Settings in the Admin Viewer
147
5
A
d
min Viewer/
V
B
 V
iewer
Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon signifying Detection mode will be displayed for a 
maximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When 
sound that meets the criteria selected under [Event] > 
[Volume Detection] in the Setting Page is detected, 
the icon turns green (p. 60)
Example:
Volume Detection status ON
Recording to a Memory Card Manually
Video displayed in the Admin Viewer can be manually 
recorded to a memory card.
Note
• To record on a memory card, a memory card must be inserted 
in the camera (p. 130) and [Save Logs and Videos] must be 
selected in the setting page > [Memory Card] > [Operation 
Settings].
• The format and size of the video recorded on a memory card 
depends on the settings made on the Setting page. 
Video format:  [Memory Card] > [Video Format]
Video size: 
JPEG  [Video] > [JPEG] > [Video Size: Upload / 
Memory card]
H.264  [Video] > [H.264(1)] > [Video Size]
„ Recording Videos Manually
The [Start/Stop Memory Card Recording] button 
appearance changes as shown below depending on 
recording status.
„ Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 118) to confirm video 
manually recorded to a memory card.
Click the [Recorded Video Utility] button to start the 
Recorded Video Utility from the Admin Viewer.
1
If you have not yet obtained the camera control 
privileges, click the [Obtain/Release Camera Control] 
button and obtain the control privileges.
2
Click the [Start/Stop Memory Card Recording] button.
Not recording
Recording
3
To stop video recording, click the [Start/Stop Memory 
Card Recording] button again.
Important
• Recording to the memory card will be terminated when the 
length of manually recorded videos exceeds 300 seconds 
from the time recording started.
• When recording manually, do not change the settings in the 
[Setting Page]. Doing so may result in the termination of the 
manual recording.