ASUS HA2402 사용자 가이드

2-3

ASUS HA2402 Series LCD Monitor 

Connect the cables as the following instructions:

•  To connect the power cord: connect one end of the power cord securely to 

the monitor’s AC input port, the other end to a power outlet. 

•  To connect the VGA/HDMI/DVI/DisplayPort cable: 

a.  Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s 

VGA/HDMI/DVI/DisplayPort jack.

b.  Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your 

computer's VGA/HDMI/DVI/DisplayPort jack.

c.  Tighten the two screws to secure the VGA/DVI connector.

•  To use the earphone: connect the end with plug type to the monitor’s 

earphone jack when an HDMI or DisplayPort signal is fed.

•  To use the USB 3.0 ports: Take the supplied USB 3.0 cable, and plug 

the smaller end (type B) of the USB upstream cable to the monitor’s USB 

upstream port, and the larger end (type A) to your computer’s USB 3.0 port. 

Make sure your computer is installed with the lastest Windows 7 operating 

system. That will enable the USB ports on the monitor to work. 

When these cables are connected, you can choose the desired signal 

from the Input Select item in the OSD menu.

•  To disconnect the AC power cord: Pull out the end of power cord from the 

monitor’s AC input port.

Press the power button   . See page 1-2 for the location of the power button. The 
power indicator   lights up in white to show that the monitor is ON.