ASUS P8H77-M 사용자 설명서

2-15

ASUS P8H77-M

Allows you to set a fixed CPU frequency. Use the <+> and <-> keys to adjust the value. The 

values range from 200k Hz to 350k Hz with a 50k Hz interval.

Allows you to control the power phase based on the CPU’s demands. Configuration options: 

[Standard] [Optimized] [Extreme] [Manual Adjustment]

DO NOT remove the thermal module when switching to Extreme and Manual Mode. The 

thermal conditions should be monitored.

This item appears only when you set the previous item to [Manual Adjustment]. Select [Ultra 

Fast] for a faster response. The reaction time will be longer when [Regular] is selected. 

Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]

DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s 

phase. 

[T. Probe] 

Select to maintain the VRM thermal balance.

[Extreme] 

Select to maintain the current VRM balance.

Allows you to configure the total power range, and extends the overclocking frequency range 

simultaneously. Configuration options: [100%] [110%] [120%]

Choose a higher value when overclocking, or under a high CPU loading for extra power 

support.

Some of the following items are adjusted by typing the desired values using the numeric 

keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the 

value. To restore the default setting, type [auto] using the keyboard and press the <Enter> 

key.

Load-line Calibration is defined by Intel VRM specifications and affects iGPU voltage. The 

iGPU working voltage will decrease proportionally to the integrated graphics loading. Higher 

load-line calibration would get higher voltage and better overclocking performance, but 

increase the CPU and VRM thermal. This item allows you to adjust the voltage range from 

the following percentages to boost the system performance: 0% (Regular), 50% (High) and 

100% (Extreme). Configuration options: [Auto] [Regular] [High] [Extreme]

Allows you to set the iGPU Current Capability. Configuration options: [100%] [110%] [120%] 

Do not remove the thermal module while changing the DIGI+ VRM related parrameters. 

The thermal conditions should be monitored.