ASUS TS300-E7/PS4 사용자 설명서

Chapter 2:  Hardware setup

2-12

1.  Unscrew and remove the metal 

cover of the bay where you want to 

install the 5.25-inch drive, and take 

off the plastic cover on the front 

bezel at the same position.

2.  Insert the drive into the bay and 

slide the bay lock to the right until it 

clicks in place.

Ensure to unplug the power cable before installing or removing any system 

components. Failure to do so may cause damage to the motherboard and other 

system components!

The system comes with three 5.25-inch 

drive bays located on the upper front 

part of the chassis. An optical drive that 

comes standard/optional with the system 

package occupies the uppermost bay 

(labeled 1). The lower bays (labeled 2 

and 3) are available for additional 5.25-

inch optical, zip, or floppy disk drives.

You must remove the front panel 

assembly before installing a 

5.25-inch drive.

3.  Connect the SATA cable to the 

SATA connector on the back of the 

drive.

4.  Connect a power plug from 

the power supply to the power 

connector on the back of the drive.