ASUS TS300-E7/PS4 사용자 설명서

5-24

Chapter 5: BIOS setup

Enables or disables the network stack feature.  

Configuration options: [Disable] [Enable]

Stop Bits [1]

Stop bits indicate the end of a serial data packet. (A start bit indicates the 

beginning.) The standard setting is 1 stop bit. Communication with slow 

devices may require more than 1 stop bit. Configuration options: [1] [2]

Flow Control [None]

Flow control can prevent data loss from buffer overflow. When sending data, 

if the receiving buffers are full, a “stop” signal can be sent to stop the data 

flow. Once the buffers are empty, a “start” signal can be sent to re-start the 

flow. Hardware flow control uses two wires to send start/stop signals. 

Configuration options: [None] [Hardware RTS/CTS]

Recorder Mode [Disabled]

With this mode enabled only text will be sent. This is to capture Terminal data. 

Configuration options: [Disabled] [Enabled]

Legacy OS Redirction Resolution [80x24]

Configures the number of rows and columns supported on legacy OS. 

Configuration options: [80x24] [80x25]

Enables or disables the console redirection feature.   

Configuration options: [Disabled] [Enabled]

Please refer to the description of the Console Redirection Settings item under 

COM0 for details.