ASUS ESC2000 Personal SuperComputer 사용자 설명서

Chapter 2:  Hardware setup

2-10

1.  Simultaneously press the 

retaining clips outward to unlock 

the DIMM.

2.  Remove the DIMM from the 

socket.

3.  Hold the DIMM by both of its 

ends, then insert the DIMM 

vertically into the socket. Apply 

force to both ends of the DIMM 

simultaneously until the retaining 

clips snap back into place, and 

the DIMM cannot be pushed 

in any further to ensure proper 

sitting of the DIMM.

Ensure to unplug the power supply before adding or removing DIMMs or other 

system components. Failure to do so may cause severe damage to both the 

motherboard and the components.

1.  Unlock a DIMM socket by 

pressing the retaining clips 

outward.

2.  Align a DIMM on the socket 

such that the notch on the DIMM 

matches the DIMM slot key on the 

socket.

A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force 

a DIMM into a socket in the wrong direction to avoid damaging the DIMM.

Support the DIMM lightly with your fingers when pressing the retaining clips. 

The DIMM might get damaged when it flips out with extra force.

Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch 

damage.