ASUS ESC2000 Personal SuperComputer 사용자 설명서

2-25

ASUS ESC2000

An SATA backplane comes pre-installed in the ESC2000. The SATA backplane has 

four 22-pin SATA connectors to support Serial ATA hard disk drives. The backplane 

design incorporates a hot swap feature to allow easy connection or removal of 

SATA hard disks. The LEDs on the backplane connect to the front panel LEDs to 

indicate HDD status. See section 1.7 LED information for details.

The front side of the SATA backplane faces the front panel when installed. This 

side includes four SATA connectors for the hot swap drive trays.

HDD 1

HDD1

CON11

HDD 2

HDD2

CON22

HDD 3

HDD3

CON33

HDD 4

HDD4

CON44

Each SATA connector is labeled (HDD1, HDD2, 

HDD3, HDD4) so you can easily determine 

their counterpart connectors at the back side of 

the backplane. Refer to the table for reference.