ASUS P10S WS 사용자 가이드

3-36

Chapter 3: BIOS Setup

This item allows you to switch off some power at S4+S5 or S5 to get the system ready for 

ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]

This item allows your system to go to ON state, OFF state, or both states after an AC power 

loss. When setting your system to [Last State], it goes to the previous state before the AC 

power loss.
Configuration options: [Power Off] [Power On] [Last State]

This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN 

controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]

This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake 

event and configure the RTC alarm date. When enabled, you can set the days, hours, 

minutes, or seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]