ASUS P10S WS 사용자 가이드

ASUS P10S WS

2-19

One short beep

VGA detected

Quick boot set to disabled

No keyboard detected

One continuous beep followed by two 

short beeps then a pause (repeated)

No memory detected

One continuous beep followed by three 

short beeps

No VGA detected

One continuous beep followed by four 

short beeps

Hardware component failure

7.

At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the

instructions in Chapter 3.

While the system is ON, press the power button for less than four seconds to put the system

on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch 

for more than four seconds to let the system enter the soft-off mode regardless of the BIOS 

setting.