ASUS DSL-N16 빠른 설정 가이드

35

4.  To set up WPS using the router’s WPS button, follow these 

steps:

a. Click Start or press the WPS button found at the rear of the 

xDSL modem router. 

b. Press the WPS button on your wireless device. This is 

normally identified by the WPS logo.

NOTE:  Check your wireless device or its user manual for the location of 

the WPS button.

c. The xDSL modem router will scan for any available WPS 

devices. If the xDSL modem router does not find any WPS 

devices, it will switch to standby mode.

5.  To set up WPS using the Client’s PIN code, follow these steps:

a. Locate the WPS PIN code on your wireless device’s user 

manual or on the device itself.  

b. Key in the Client PIN code on the text box.
c. Click Start to put your xDSL modem router into WPS survey 

mode. The router’s LED indicators quickly flash three times 

until the WPS setup is completed.