ASUS B150M-A 사용자 설명서

1-12

Chapter 1: Product introduction

2

4 5

3

6

8

7

1

11

9

10

12

This port is for a PS/2 mouse.

This 15-pin port is for a VGA monitor or other

VGA-compatible devices.

These ports allow Gigabit connection to a Local Area Network

(LAN) through a network hub.

Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis 

intrusion sensor or switch sends a high-level signal to this connector when a chassis

component is removed or replaced. The signal is then generated as a chassis intrusion

event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

+5VSB_MB

Chassis Signal GND

CHASSIS