ASUS 4G-AC55U 사용자 설명서

To enable WPS on your wireless network:
1. From the navigation panel, go to Advanced Settings >

Wireless > WPS tab.

2.  In the Enable WPS field, move the slider to ON.
3.  WPS uses 2.4GHz and 5GHz radio concurrently.
4.  You can use any of the following WPS methods for wireless

connection pairing:

• PBC (Push Button Configuration) Mode:
• Hardware PBC on the router: Press the physical WPS

button on wireless router, and then press WPS button on

wireless client for three (3) minutes.

• Software PBC on the router: Tick <Push button> on WPS

Method field, click Start, and then press the WPS button

on the wireless client for three (3) minutes.

• PIN Code Mode:
• Pairing from the wireless client: Press the WPS button on

the wireless router, and then perform WPS connection

process in PIN code mode and enter the AP PIN Code on

the client device.

• Pairing from the wireless router: Press the WPS button

on wireless client, and then perform the WPS connection

process in PIN code mode and enter the Client PIN Code

on the WPS Method > Client PIN Code filed. Check if

the PIN code is correct and then click Start to pair with

wireless client.

NOTES:
• WPS supports authentication using Open System and WPA2-

Personal. WPS does not support a wireless network that uses a

Shared Key, WPA-Personal, WPA-Enterprise, WPA2-Enterprise, and

RADIUS encryption method.

• Check your wireless device or its user manual for the location of the

WPS button.

• During the WPS process, the wireless router scans for any available

WPS devices. If the wireless router does not find any WPS devices, it

switches to idle mode.

• The router’s power LED indicators quickly flash three minutes until

the WPS setup is completed.