ASUS RS700-E8-RS8 V2 사용자 가이드

5-38

Chapter 5: BIOS Setup

Allows you to change the SEL event log configuration.

SEL Components [Enabled]
Allows you to enable or disable all features of system Event Logging during boot.
Configuration options: [Disabled] [Enabled]

•

The following items appears only when you set SEL Components to [Enabled].

•

All values changed here do not take effect until computer is restarted.

Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Error code]
Disable the logging of EFI Status Codes, or log only error code, or only progress code

or, both.
Configuration options: [Disabled] [Both] [Error code] [Progress code]

The sub-items in this configuration allow you to configure the BMC network parameters.

Configuration Address source DM_LAN1/LAN1 [Previous State]
This item allows you to configure LAN channel parameters statistically or dynamically (by

BIOS or BMC). Unspecified option will not modify any BMC network parameters during

BIOS phase.
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]

[DynamicBmcNonDhcp]