ASUS STRIX SOAR 빠른 설정 가이드

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean machine surface with a cloth (Do not apply any detergent or cleaning fluid).
7.  Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including 

amplifiers) that produce heat.

9.  The polarized or grounding type plug is for user safety. A polarized plug has two blades with one wider than the 

other other. A grounding -type plug has two blades and a third grounding prong. The wide blade or the third 
prong is provided for your safety. If the provided plug does not fit into your outlet, consult your electrician for 
installation of the appropriate type of power socket.

10.  Protect the power cord from being stepped on or compressed, particularly at the point where the cable is 

connected to the device.

11.  Only use attachments/accessories specified by the manufacturer.
12.  Use with only the cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product.  

When a cart is used, use caution when moving the cart or trolley to avoid injury.

13.  Unplug the device during lightning storms or when left unused for long periods of time.
14.  Refer all repairs to qualified service personnel. Servicing is required when the product has been 

damaged in any way such as when the power cord or plug is damaged, liquid has been spilled or 
an object have fallen into the product, the product has been exposed to rain or moisture or does 
not operate normally or has been dropped.

For your own safety please read the following important instructions carefully before attempting to connect this unit 
to the main power supply. The instructions provided will help you get the best performance from this device and 
prolong the life of this product.

Do not attempt to repair or disassemble this product. Consult a qualified technician or professional for service or 
repairs.

To ensure a successful installation of the ASUS Strix sound card series, your computer must meet the following 
requirements:
•  One PCI Express 1.0 (or higher) compatible slot for the audio card
•  One available 6-pin peripheral power cable connector from PC’s power supply unit
•  Microsoft® Windows® 8.1/8/7/(32/64bit)
•  Intel® Pentium®4 1.4GHz or AMD Athlon 1400 CPU or faster CPU
•  >256 MB DRAM system memory
•  >60 MB available HDD space for driver installation package
•  CD-ROM drive (or DVD-ROM drive) for software installation
•  High-quality headphones, powered analog speakers, to enjoy the ultra-high fidelity sounds.

This package should contain the following:

• STRIX sound card series 7.1-Channel sound card
• Driver CD
• S/PDIF TOSLINK optical adapter x 1
• Quick Start Guide
• Box link cable (Strix Raid DLX/Strix Raid Pro only)
• Strix control box (Strix Raid DLX/Strix Raid Pro only)

Connect your external PC microphone to this 3.5mm port for voice input. Built-in high-quality Microphone

pre-amplifier. 

Connect analog devices like MP3 players, CD players, music synthesizers, and other line-level sound sources to

this 3.5mm port for audio recording or processing.

Connect your headphone to this port.

Connect Strix control box directly to this port 

For 2 channel speaker systems, connects to the input on the powered speakers.

Connect to the rear surround input on 4 powered analog speakers.

Connects to the center/subwoofer input on 4/5.1 powered analog speakers.

Connects to the side surround input on 7.1 powered analog speakers.

Optical digital output jack. Connects to external digital decoder or digital speaker systems, Home Theater 

systems, AV receivers for outputting digital audio including PCM, Dolby Digital, DTS, WMA-Pro, etc. Connect

to the surround channel input on 4/5.1/7.1 powered analog speakers

Tab

Tab to select output source bewtween headphone and speaker.

Long Press

Long press to set selected output source to mute.

Turn

Turn knob clockwise or anti-clockwise to adjust volume level.

[Custom Mode]: Tab

CUSTOM MODE (In conjuction with STRIX RAID MODE)
Tab knob to turn on/off a selected effect.
Note:  This control knob is used in conjunction with the Strix RAID key. When Strix 

RAID Mode is selected, this goes into a custom mode.

[Custom Mode]: Turn

CUSTOM MODE (In conjuction with STRIX RAID MODE)
Turn knob clockwise or anti-clockwise to adjust intensity level of a selected effect.

LED indicator that displays intensity level of volume or effects.

LED indicator that displays selected output device.
Note: When the device is under mute, the LED turns red..

STRIX RAID Mode

This is a programmable key that can customize and lock a special effect from the 

Sonic Studio so that you can control and adjust effects spontaneously in game. 
Press on/off to enter/exit Custom Mode. The LED turns Orange to indicate the Custom 

Mode.
To set up this key, please go to the Sonic Studio and select desired effect to lock to the 

Strix RAID Mode.
Now you can use the turn knob to turn on/off effects, as well as adjust the intensity 

level of the effect.

Connect your headphones to this port.

Connect your external PC microphone to this 3.5mm jack for voice input.

Insert kensington lock to lock the device.

Connect Strix control box directly to this port

繁體中文

簡體中文

Side+

S/PDIF Out

Mic/Line-in

Headphone

Front

Box Link

Rear

Center

Speaker

Headphone

1.  麥克風輸入連接埠
 Line In 連接埠
2.  耳機輸出連接埠
3.  Box link
4.  前置輸出連接埠
5.  後置輸出連接埠
6.  中心輸出連接埠
7.  側邊輸出連接埠
 S/PDIF 輸出連接埠
8.  輸出選擇 / 音量調節
9.  LED 指示燈
10. 輸出源 LED 指示燈
11. STRIX RAID Mode
12. 耳機輸出連接埠
13. 麥克風輸入連接埠
14. Kensington

®

安全插槽

15. Box link

1.  麥克風輸入接口
 Line In 接口
2.  耳機輸出接口
3.  Box link
4.  前置輸出接口
5.  後置輸出接口
6.  中心輸出接口
7.  側邊輸出接口
 S/PDIF 輸出接口
8.  輸出選擇 / 音量調節
9.  LED 指示燈
10. 輸出源 LED 指示燈
11. STRIX RAID Mode
12. 耳機輸出接口
13. 麥克風輸入接口
14. Kensington

®

安全插槽

15. Box link