Epson Сетевое руководство 네트워크 가이드
Network Setup Menu
These items are used to make network settings on the printer’s control panel.
Note:
The available settings vary depending on your printer model.
The available settings vary depending on your printer model.
Item
Settings
NETWORK SETUP
Disable, Enable
IP ADDRESS SETTING*
Auto, Panel, PING
IP*
0.0.0.0 to 255.255.255.254
SM*
0.0.0.0 to 255.255.255.255
GW*
0.0.0.0 to 255.255.255.255
AppleTalk*
On, Off
MS Network*
On, Off
Bonjour*
On, Off
INIT NETWORK
SETTING*
SETTING*
EXECUTE
* Available only when Enable is selected for NETWORK SETUP.
Instructions on Using a Dial-Up Router
This section describes instructions on using a dial-up router.
If DHCP is used to assign an IP address of the printer and the Dynamic DNS function is not
supported, you need to change the printer port setting every time you turn on the printer.
Therefore, we recommend that you set a valid IP address for the network interface by using the
one of the following methods.
supported, you need to change the printer port setting every time you turn on the printer.
Therefore, we recommend that you set a valid IP address for the network interface by using the
one of the following methods.
❏ Set the IP address for the network interface manually. Use EpsonNet Config. See the EpsonNet
Config User’s Guide for details.
❏ Specify the network interface by using the bind of DHCP function.
❏ Set the exclusive address of the DHCP function.
EPSON Network Guide
Tips for Administrator 126