Epson Сетевое руководство 네트워크 가이드
Inkjet printers/Large format inkjet printers (Models that do not support 1000 Mbps
communication)
communication)
Status light
Data light
Network Status
Green
Yellow
Ready (10 M link)
Green
Yellow (Flashing)
Receiving packets (10 M link)
Red
Yellow
Ready (100 M link)
Red
Yellow (Flashing)
Receiving packets (100 M link)
Large format inkjet printers (Models that support 1000 Mbps communication)
Status light
Data light
Network Status
Red
Yellow
Ready (100 M link)
Red
Yellow (Flashing)
Receiving packets (100 M link)
Green
Yellow
Ready (1000 M link)
Green
Yellow (Flashing)
Receiving packets (1000 M link)
Network connector
RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use
this cable for both 10Base-T and 100Base-TX. (On some models, 1000Base-T is also supported.)
this cable for both 10Base-T and 100Base-TX. (On some models, 1000Base-T is also supported.)
c
Caution:
You must use the following shielded twisted-pair cable to connect the network interface to a
network.
You must use the following shielded twisted-pair cable to connect the network interface to a
network.
❏ Category-5 or higher for the 10Base-T or 100Base-TX connection
❏ Category-5e or higher for the 1000Base-T connection
About the Software
The software CD-ROM provided with your printer includes the following network software.
EPSON Network Guide
Introduction 16