Epson Сетевое руководство 네트워크 가이드
Configuring the Network Interface Using Web-Based EpsonNet Config
After you have assigned an IP address to the network interface using EpsonNet EasyInstall,
EpsonNet Config for Windows or Macintosh, or the arp/ping command, you can configure the
network interface using Web-based EpsonNet Config.
EpsonNet Config for Windows or Macintosh, or the arp/ping command, you can configure the
network interface using Web-based EpsonNet Config.
Note:
❏ A Web browser must be installed on your computer.
❏ TCP/IP must be correctly set for the computer and the network interface.
❏ Do not run both EpsonNet Config for Windows or Macintosh and Web-based EpsonNet Config
at the same time.
❏ Your browser may restrict some characters you can use. For details, see your browser or
operating system documentation.
Note for users of printers supporting NetWare queue-based printing:
If you are using the dial-up environment without running NetWare, select Disable on the NetWare
screen. If Enable is selected, the extra account may be charged when you are using the dial-up router.
If you are using the dial-up environment without running NetWare, select Disable on the NetWare
screen. If Enable is selected, the extra account may be charged when you are using the dial-up router.
Follow the steps below to change the IP address using EpsonNet Config.
1. Turn on your printer.
2. Run EpsonNet Config using one of the following ways.
❏ Run EpsonNet Config for Windows or Macintosh. Select the printer you want to configure
from the list and then click Launch Browser.
❏ Open your browser, and then type in the IP address of the network interface directly. Do
not run EpsonNet Config for Windows or Macintosh.
http
://IP address of network interface/
Example: http://192.168.100.201/
Note:
To check the IP address of the network interface, use EpsonNet Config. See “About EpsonNet
Config” on page 87 for Windows users, or see “About EpsonNet Config” on page 89 for Macintosh
users for details.
To check the IP address of the network interface, use EpsonNet Config. See “About EpsonNet
Config” on page 87 for Windows users, or see “About EpsonNet Config” on page 89 for Macintosh
users for details.
EPSON Network Guide
Network Software 92