Epson Сетевое руководство 네트워크 가이드

5. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to

open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask,
etc. and then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on
page 23.

For Windows Server 2003, use the following procedure to install the necessary components.

1. Click Start, point to Control Panel, and then select Network Connections. Click Local Area

.

2. Click the Properties button.

3. Check if the following necessary components are in the list.

The following table lists the components required for configuring the network interface with
EpsonNet Config.

Epson     Network Guide

How To     20