Epson Руководство по установке устройства настенного крепления модели ELPMB26 설치 가이드

28

D

Secure the screw attached to the hook 
using the M6 hexagon wrench. Put one of 
the supplied screws into the screw hole 
on the hook and secure it using the 
hexagon wrench. 
Fix the other three hooks in the same way, 
by securing their screws.

Always use the screws supplied to secure the 
projector and the projector plate.

A

Put the shaft of the projector plate into 
the grooves of the ceiling plate and place 
it securely in the horseshoe-shaped 
points.
Do not release your hands from the 
projector until mounting is complete.

B

Put the screws for the vertical angle 
adjustment points that were removed 
when removing the ceiling plate from the 
projector plate in the screw holes.
Secure the two screws in the angle 
adjustment points as shown in the left 
illustration, using the supplied M8 hexagon 
wrench to fix the projector. For details on 
adjusting the angle of the projector, see the 
next section "Adjusting the installation 
angle".

Secure the screws attached 

to the hooks.

Put the supplied screws 

through the screw holes and 

secure them.

Secure the screws at the height of these 
marks so that the projector is set up almost 
horizontally. Use them as a guide.