Epson Сетевое руководство 네트워크 가이드

4. Double-click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/

 on the Local Area Connection Properties dialog box to open the properties dialog box. Set

the IP address, the subnet mask, etc. and then click OK.

5. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on
page 19.

For Windows XP, use the following procedure to install the necessary components.

1. Click Start, highlight Control Panel, and then click Network and Internet Connections.

Select Network Connections.

2. Under LAN or High-Speed Internet, click the Local Area Connection icon.

3. Under Network Tasks, click Change settings of this connection.

4. Check if the following necessary components are in the list.

The following table lists the components required for configuring the network interface with
EpsonNet Config.

Epson     Network Guide

How To     16