Epson Сетевое руководство 네트워크 가이드

EpsonNet Config with Web Browser is a Web-based utility designed to configure the printer for use
on a network.

By typing the IP address of the network interface for the URL in your browser, you can start EpsonNet
Config to allow you to configure the network interface for TCP/IP, NetWare, MS Network,
AppleTalk, IPP, and SNMP.

❏ Microsoft Internet Explorer version 6.0 or later

❏ Apple Safari 3 or later

❏ Mozilla Firefox version 3.6 or later

After you have assigned an IP address to the network interface using EpsonNet Setup, EpsonNet
Config for Windows or Macintosh, or the arp/ping command, you can configure the network
interface using EpsonNet Config with Web Browser.

❏ A Web browser must be installed on your computer.

❏ TCP/IP must be correctly set for the computer and the network interface.

❏ Do not run both EpsonNet Config for Windows or Macintosh and EpsonNet Config with Web

❏ Your browser may restrict some characters you can use. For details, see your browser or operating

The following procedure shows an example of configuring the network interface on a TCP/IP IPv4
network.

1. Turn on your printer.

2. Run EpsonNet Config using one of the following ways.

Epson     Network Guide

Network Software     39