ASUS PEI-10G/82599-2S 사용자 가이드

ASUS PEI-10G/82599-2S

2-3

The Intel(R) iSCSI Remote Boot provides hardware-based Ethernet card configurations. 
To start the Intel(R) iSCSI Remote Boot and access the main screen:

1. 

Turn on the system.

2. 

During POST, press <Ctrl+D> when the following screen appears.

3. 

From the iSCSI Port Selection screen, use the Up/Down arrow key to select an 

Ethernet device to configure and press <Enter>.

Intel(R) iSCSI Remote Boot version 3.0.34

Copyright(c) 2003-2014 Intel Corporation. All rights reserved.

Press ESC key to skip iSCSI boot initialization.

Press <Ctrl-D> to run setup...

MAC:00E01803016F Dev:1533 Loc:11:0:0 BOOT:PXE
MAC:00E01803016E Dev:1533 Loc:10:0:0 BOOT:PXE

MAC:00E01803016D Dev:1533 Loc:9:0:0 BOOT:PXE
MAC:00E01803016C Dev:1533 Loc:8:0:0 BOOT:PXE

More below ...

Intel(R) iSCSI Remote Boot v3.0.34

Select iSCSI Boot priority: P=PRIMARY S=SECONDARY D=DISABLED B=BLINK LED

iSCSI Port Selection

•

Press <P> to set the selected item as the primary boot priority, press <S> to set the 

selected item as the secondary boot priority, or press <D> to disable the selected item.

•

Press <B> to blink the LED of the selected item.

4. 

From the iSCSI Port Configuration screen, use the Up/Down arrow key to select an 

item and press <Enter>.

iSCSI Boot Configuration
iSCSI CHAP Configuration

Discard changes and Exit

Save changes and Exit

Intel(R) iSCSI Remote Boot v3.0.34

Copyright(c) 2003-2014 Intel Corporation. All rights reserved.

iSCSI Port Configuration