ASUS Z10PA-D8 사용자 가이드
華碩 Z10PA-D8 系列主板用戶手冊
4-31
C/A Parity Enable [Auto]
開啟或關閉 DDR4 命令地址校驗。設置值有:[Auto] [Disabled] [Enabled]
Memory Topology
顯示帶有內存安裝信息的內存拓撲。
Memory Thermal
用來進行散熱設置。
Set Throttling Mode [Disabled]
設置值有:[Disabled] [OLTT] [CLTT]
OLLT Peak BW [xxx]
設置 OLTT 最高頻寬。設置值為百分比,且有效偏移值為 25-100。
DIMM Tem Stat [xx]
選擇 DIMMTEMPSTAT 作為 temp_mid 或 tem_hi。
Memory Power Savings Mode [Auto]
用來設置 C K E 和其他相關內存節能功能。設置值有:[A u t o]
[Disabled] [APD On] [User Defined] [Reserve] [Reserved]
Memory Power Savings Advanced Options
CK in SR [Auto]
設置值有:[Auto] [Driven] [Tri-State] [Pulled Low] Pulled High]
MDLL Off [Auto]
若設為開啟,您可以在 S R 時關閉 M D L L。設置值有:[A u t o]
[Disabled] [Enabled]
MEMHOT Throttling Mode [Input-only]
若設為開啟,您可以在 SR 時關閉 MDLL。設置值有:[Disabled]
[Input-only] [Output-only]