ASUS TS700-E8-RS8 사용자 설명서

Chapter 2:  Hardware setup

2-16

DO NOT remove the backplane unless necessary!

1.

Remove all hot-swap HDD trays from

the chassis.

2.

Disconnect all cables from the SATA/

SAS backplane.

3.

Loosen the four screws on the

backplane.

4.

Firmly hold the backplane, and turn it in

the direction of the arrow.

5.

Remove the backplane from the module.

1.

Release a drive tray by pushing the

spring lock to the right, and then pulling 

the tray lever outward. The drive tray 

ejects slightly after you pull out the lever.