Canon imagePROGRAF iPF6450 매뉴얼
Important
•
Store the ink tanks you removed with the ink holes (a) facing up.
Otherwise, ink may leak and cause stains.
Otherwise, ink may leak and cause stains.
3
Close all ink tank lock levers, and then close the
Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
Important
•
Do not remove the Maintenance Cartridge unless a replacement message appears.
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink to leak out.
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink to leak out.
4
When the process is finished, "Completed! Turn
Power Off!!" is displayed.
Press the Power button and turn off the printer.
Power Off!!" is displayed.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
1
Disconnect the power cord and interface cable.
Important
•
Unplug the power cord once the power is turned off. Unplugging the printer before it is off and moving it may
cause damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall the ink tank,
and perform the procedure again.
cause damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall the ink tank,
and perform the procedure again.
Preparing to Transfer the Printer
iPF6450
Printer Relocation
Preparing to Transfer the Printer
80