Canon imageRUNNER ADVANCE C5250 매뉴얼

다운로드
페이지 204
102
   Replacing  the  Waste  Toner 
Container 
 When the waste toner container nears capacity, a message appears on the touch panel display. In this case, you should prepare 
a new waste toner container. 
 When the waste toner container is full, a screen with instructions on how to replace the waste toner container appears on the 
touch panel display. Follow the procedure described below to replace the waste toner container. 
 Even if you do not replace the waste toner container immediately, you can perform printing for a while. The number of prints 
you can make depends on the content you print. 
 However, if you continue printing, an error will occur and you will become unable to print. 
• Do not burn or throw used waste toner containers into open fl ames. Also, do not store waste toner 
containers in places exposed to open fl ames, as this may cause the toner to ignite, resulting in burns or 
a fi re.
• If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up 
with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have 
safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the 
vacuum cleaner, or result in a dust explosion due to static discharge.
• If toner is ingested, consult a physician immediately.
• If toner gets onto your hands or clothing, wash it off  immediately with cold water. Washing it off  with 
warm water will set the toner, and make it impossible to remove the toner stains.
 
 
•   Your local authorized Canon dealer will dispose of used waste toner containers. 
•   Used toner cannot be reused. Do not mix new and used toner together. 
•   Use only waste toner containers intended for use with this machine. 
•   Do not replace the waste toner container before the message prompting you to replace it appears on the touch panel display. 
•   When attaching the waste toner container, make sure to push it in all the way. If the container is not pushed in all the way 
when you remove it, it may come out with its shutter open. Since this may cause toner to fl y out, close the shutter with your 
hand. 
  
 
 
•   Complete instructions on how to replace the waste toner container can be accessed by pressing [Previous] or [Next] on the 
touch panel display. 
•   If the waste toner container must be replaced during a print job, the remaining prints are made after the new waste toner 
container is installed. 
1
Open the front cover of the machine.
1.  Open the front cover, 
holding both sides.
2.  Lower the locking lever.