Canon imagePROGRAF iPF850 MFP M40 매뉴얼

Responding to Messages

Error messages may appear on the display screen of the control panel during printer installation. If so, it may not indicate a problem with the printer, and the issue may

be easily resolved. Common messages and the causes are listed here with corrective actions. For more information on other messages, refer to the User's Guide or

Basic Guide. (See "How to Display the Electronic Manuals" on P.8)

Message

Cause

Corrective Action

No ink tank loaded. Check ink tank.

There is no ink tank loaded.

Load or reload the ink tank.

(See steps 4-2 on pages 7-8)

Cannot recognize print head.

The printhead is not installed.

Install the printhead.

(See steps -9 on page 9)

Paper loaded crooked.

The loaded paper is crooked.

Reload the cut sheet. (See steps 2-5 on page 0)

Paper size not detected. Lift the release lever

and reload paper.

The leading edge of the cut sheet is loaded behind the

position indicated by the paper alignment line.

Reload the cut sheet so that the leading edge of the cut sheet is in

front of the paper alignment line. (See steps 2-5 on page 0)

The roll paper is fed even though cut sheet remains

selected as the paper source.

Lift up the release lever and rewind the roll paper onto the

roll holder. Next, press the

Load key, select roll paper as the

paper source, and feed the roll paper again. For details, refer to

"Removing the Roll from the Printer" and "Loading Rolls in the

Printer" in the User's Guide and Basic Guide.

No maintenance cartridge.

The maintenance cartridge is not connected.

Install the maintenance cartridge correctly.

Hardware error. xxxxxxxx-xxxx

(x represents a letter or number)

The belt stopper or the tape inside the top cover has not

been removed.

Turn off the power, open the top cover, and remove the tape and

the belt stopper, then turn the power on.

You may have encountered an error that cannot be

resolved.

Turn off the printer and wait at least three seconds before restoring

the power.

If the message appears again, write down the error code and

message, turn off the printer, and contact your Canon dealer for

assistance.

ERROR Exxx-xxxx

(x represents a letter or number)

You may have encountered an error that cannot be

resolved.

Write down the error code and message, turn off the printer, and

contact your Canon dealer for assistance.