Canon imagePROGRAF iPF840 MFP M40 매뉴얼
f
Paper Feed Slot
When loading a roll, insert the edge of the roll paper here. You can load rolls in two positions, on the printer
side in the Roll 1 (Upper) position and on the roll unit side in the Roll 2 (Lower) position.
When loading a roll, insert the edge of the roll paper here. You can load rolls in two positions, on the printer
side in the Roll 1 (Upper) position and on the roll unit side in the Roll 2 (Lower) position.
g
Holder Stopper
Secure rolls on the Roll Holder with this part.
Secure rolls on the Roll Holder with this part.
h
Ink Tank Cover
Open this cover to replace an Ink Tank.
Open this cover to replace an Ink Tank.
i
Control Panel
Use this panel to operate the printer and check the printer status.
Use this panel to operate the printer and check the printer status.
j
Release Lever
Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper.
Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper.
k
Maintenance Cartridge
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)
l
Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.
When carrying the printer, have six people hold it by these handles under both sides.
m
Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge.
Open this cover to replace the Maintenance Cartridge.
n
Stand
A stand that holds the printer. Equipped with casters to facilitate moving it.
A stand that holds the printer. Equipped with casters to facilitate moving it.
o
Stand L
The left leg of the Stand.
The left leg of the Stand.
p
Stand R
The right leg of the Stand.
The right leg of the Stand.
q
Leg Covers
Covers for Stand L and Stand R.
Covers for Stand L and Stand R.
r
Stopper
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may
scratch the casters or the floor.
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may
scratch the casters or the floor.
s
Roll Unit
A unit for loading two rolls.
A unit for loading two rolls.
Front
iPF840 Series
Printer Parts
Printer parts
68