Canon imagePROGRAF iPF840 MFP M40 매뉴얼
6
Holding the paper on both sides, pull the jammed por-
tion out toward the front. Use a scissors or cutting tool
to cut away the printed or wrinkled portion.
tion out toward the front. Use a scissors or cutting tool
to cut away the printed or wrinkled portion.
Caution
•
When cutting paper, be careful to avoid injury and damaging the printer.
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
right until it stops.
Important
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
when you turn on the printer.
8
Hold the edge of the roll paper in the middle as you
gently pull it evenly to the position of the Ejection
Guide (a). Align the right side of the roll paper with the
Paper Alignment Line (b), keeping this side parallel to
the line, and then lower the Release Lever.
gently pull it evenly to the position of the Ejection
Guide (a). Align the right side of the roll paper with the
Paper Alignment Line (b), keeping this side parallel to
the line, and then lower the Release Lever.
b
a
iPF840 Series
Clearing Jammed Roll Paper
Troubleshooting
Problems Regarding Paper
99