Canon imagePROGRAF iPF840 MFP M40 매뉴얼

Changing the Type of Paper

Note

When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the type of
paper, and then press the OK button.
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length after
the type of paper.  (See "

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to

select the Paper tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Paper Menu is displayed.

Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.

Press the ▲ button or the ▼ button to select the media type (Roll 1 (Upper), Roll 2 (Lower), or Cut
Sheet), and then press the OK button.

Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.

Important

Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.

Note

For details on types of paper, see the Paper Reference Guide.  (See "

 By de-

fault, Plain Paper is selected.

If you move the Release Lever, the setting automatically reverts to the previously selected paper.

Using the Same Type of Paper Regularly

Configure this setting so that current media type settings will be automatically selected when you load the same
type of paper later.

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to

select the Paper tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Paper Menu is displayed.

Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.

Press ▲ or ▼ to select On, and then press the OK button.

Ready

Plain Paper

OK: Paper Menu

Plain Paper

 

Ready

Plain Paper

OK: Paper Menu

Plain Paper

 

iPF840

                                                                                                                                                                                    

Changing the Type of Paper

                                                                                                                                                                                                                      

Handling and Use of Paper

Handling rolls

351