Canon VB-M641V 매뉴얼

170

Use the [Preset Registration] tab to register presets and the home position.

The number of presets you can register are as follows.

• Maximum 257 presets (including the home position). 

• Maximum 21 presets (including the home position). 

Note

• You cannot register presets/initial settings if the Panorama Creation Tool, Privacy Mask Setting Tool, View Restriction Setting Tool or 

Intelligent Function Setting Tool are running on a computer running Admin Viewer.

• You can only use one registered preset/initial setting on one computer.

• Only users with administrator privileges can register presets.

Display the Preset Setting Panel

If you click [Preset Setting] in [Control for Admin] > [Preset/Initial Setting], the Preset Setting panel will appear.

Note

The following panels will also appear with the Preset Setting panel.

– Panorama Display Panel

 

– Digital PTZ Panel 

Register Presets

Important

• Reconfigure the presets if you change the [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] (P. 78) settings on 

the Setting Page.

• Reconfigure the presets if you change [Video Settings] > [All Videos] > [Video Size Set] (P. 72) settings in the Setting Page.

• If you change the settings in [Camera Settings] > [Camera Control] > [Image Stabilizer] in the Setting Page (P. 75), the angle of view 

when using the camera will not match the angle of view when you configured presets. If you change [Image Stabilizer] settings, 
recheck the preset settings.

R11

R10

M641 M640 M741 M740

R11

R10

M641 M640 M741 M740