Canon REALiS WUX6010 D Pro AV 매뉴얼
Maintenance
164
Replacing the Air Filter
Follow the procedure below when replacing the air filter.
1
Turn off the projector power and remove the power plug.
2
Hook your finger around the air
filter frame handle on the side of
the projector, and pull the air
filter out to remove it.
filter frame handle on the side of
the projector, and pull the air
filter out to remove it.
3
Remove the filter from the air
filter frame. First disengage the
tab on the inside, then remove
the entire air filter from the
frame.
filter frame. First disengage the
tab on the inside, then remove
the entire air filter from the
frame.
4
Install a new air filter into the
frame. First insert the air filter
tab into the groove on the handle
side of the frame, then press the
air filter into the frame.
frame. First insert the air filter
tab into the groove on the handle
side of the frame, then press the
air filter into the frame.
5
Securely insert the frame
holding the air filter, all the way
into the projector.
holding the air filter, all the way
into the projector.
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• When the lamp is replaced, it is recommended that you also replace the air filter.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part no.: RS-FL01
• When the lamp is replaced, it is recommended that you also replace the air filter.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part no.: RS-FL01
Air filter
Air filter frame
handle
handle
Air filter
Air filter frame