Canon REALiS WUX6010 D Pro AV 매뉴얼

Before Inst

allat

ion

Before Installation

Precautions When Carrying/Shipping the

Projector

Precautions for Installation

Be sure to read “Safety Instructions” and “For Safe Use” (

–

P18

). Also

take the following precautions during installation.

■ Do Not Use in the Following Environments

• Locations with excessive humidity, dust, oily smoke or tobacco smoke

Adhesion to the lens, mirrors or other optical parts may reduce image quality.

• Near high-voltage power lines or sources of electrical power

This may cause malfunction.

• On soft surfaces such as carpets or cushioned mats

Heat may build up inside the projector and damage it.

• Locations with excessive temperature or humidity

This may damage the projector. Acceptable ranges for operating and storage
temperature and humidity are as follows.
* Operating temperature and humidity applies to when the projector is projecting

or in standby mode.

Prepare the projector as described below before carrying it.

• Disconnect the cables connected to the projector. Carrying the

projector with the cables attached may cause an accident.

• Retract the adjustable feet before moving the projector. Leaving

the feet extended may cause damage.

• Do not strike the projector

or subject it to impact. Doing
so may cause a malfunction.

• Do not install the projector

so that it is inclined or
standing vertically. The
projector may be damaged if
it tips over.

• Do not block the air intake or

exhaust vents of the cooling
fan. Blocking the vents may trap heat inside the projector, which
may shorten the useful life of the lamp or damage the projector.

Operating temperature

Operating humidity

Storage temperature

0°C (32°F) – 40°C (104°F)

Up to 85%

-30°C (-22°F) – 60°C (140°F)

Exhaust vent

Air intake vent

Warmed
airflow