Canon REALiS WUX6010 D Pro AV 매뉴얼

32

This terminal is used to connect the optional remote control (RS-RC05) using a 
cable.

Terminals for audio input. Audio supplied to these terminals is played through 
the internal speaker when you select [Audio in] as the source audio terminal 
for the selected source video. (

Outputs the audio to external AV equipment. This outputs the audio signal that 
corresponds to the projected image signal.

Connects a USB flash drive. Used for projection of images on a USB flash 
drive, or for firmware updates.

Connects the external monitor output from a computer.
Receives digital PC signal (Digital PC).
A VGA-DVI-I cable can also be used to receive analog computer signals 
(Analog PC-1).

Receives the analog PC signal (Analog PC-2).
A component cable can be used to receive the component image signal 
(Component).

Receives digital video signals (HDMI).
Carries both video and audio signals across a single cable.

Connects the LAN cable (shielded twisted pair).
Used to connect the projector to a network.

Receives HDBaseT input including digital video and audio signals.
A single LAN cable (shielded twisted pair) can be used for both video and 
audio input.
This port can also be used to connect the projector to a network.