Canon imageRUNNER ADVANCE 4235 매뉴얼
89
Routine Maint
enanc
e
3
Return the punch waste tray to its original position.
1. Push the punch waste
tray back into its original
position.
position.
2. Close the front cover of the
puncher.
When closing the cover, be careful not to get your fi ngers caught, as this may result in personal
injury.
injury.
If the punch waste tray is not securely in place, you cannot make copies or prints in the Hole Punch mode.
Inner 2/3 Hole Puncher-A1
The Inner 2/3 Hole Puncher-A1 is available only if the Inner Finisher-D1 is attached.
1
Pull out the punch waste tray.
1. Open the front cover of the
inner fi nisher.
2. Pull out the punch waste
tray.