Canon imagePRESS C800/C700 매뉴얼
Keep the print system clean
Cleaning tasks and procedures
To keep your print system in optimal condition and prevent poor image quality, clean the
following system parts monthly:
• Glass plate
• Scanning area of the automatic document feeder
• Scanning sensors (via the control panel)
• Automatic document feeder rollers (via the control panel)
• The inside of the print module (via the control panel)
• Corona assembly wires (via the control panel)
• Main unit roller (via the control panel)
• Fixing pressure belt (via the control panel)
• Fixing belt (via the control panel)
following system parts monthly:
• Glass plate
• Scanning area of the automatic document feeder
• Scanning sensors (via the control panel)
• Automatic document feeder rollers (via the control panel)
• The inside of the print module (via the control panel)
• Corona assembly wires (via the control panel)
• Main unit roller (via the control panel)
• Fixing pressure belt (via the control panel)
• Fixing belt (via the control panel)
You are advised to clean the control panel weekly.
The control panel enables access to the wires, rollers and drums. To begin the procedures to
clean machine parts, you need a maintenance for operators password. (See
clean machine parts, you need a maintenance for operators password. (See
WARNING
• When you clean the machine, first turn OFF the main power switch, and disconnect the
power cord. Failure to observe these steps can result in a fire or electrical shock.
• Disconnect the power cord from the power outlet regularly, and clean the area around the
base of the power plug's metal pins and the power outlet with a dry cloth to ensure that all
dust and grime is removed. If the power cord is connected for a long period of time in a
damp, dusty, or smoky location, dust can build up around the power plug and become damp.
This can cause a short circuit and may result in a fire.
dust and grime is removed. If the power cord is connected for a long period of time in a
damp, dusty, or smoky location, dust can build up around the power plug and become damp.
This can cause a short circuit and may result in a fire.
IMPORTANT
• Do not dampen the cloth with too much water. This can damage prints or machine parts.
• Do not use alcohol, benzene, paint thinner, or other solvents to clean machine parts. This can
• Do not use alcohol, benzene, paint thinner, or other solvents to clean machine parts. This can
damage plastic machine parts.
The following procedures are described in this chapter:
•
•
•
•
•
•
•
•
•
•
•
Keep the print system clean
Chapter 10 - Maintain the print system
211
imagePRESS C800 Series