Canon imagePRESS C800/C700 매뉴얼

Media can arrive curled in the output tray. This is caused by temperature differences during the
print process. You can perform a correction procedure to prevent curled sheets in the output
trays. The results of the correction are immediately effective for jobs that use these media.

For media that need a curl correction on the length and width, create two different entrances in
the media catalog. The correction procedure changes the media attributes in the media catalog,
so that the adjustments are applied to all jobs that use the same media. You can find the
correction values in the system adjustment settings of the Settings Editor (Preferences tab).

You can correct curled output media via the Trays view, System view, or via the media used in a
job. The procedure below describes the correction via the System view.

For more information, see:

Make sure that all media attributes are correct in the media catalog.

1.

Touch [System] -> [Media].

2.

Select the media from the media catalog.

3.

Touch [Optimize] -> [Curl correction].

4.

Define the correction factor with the + and - buttons. 
Start with small increments to avoid paper jams.

5.

Touch [OK].

imagePRESS C800 Series