Canon imagePRESS C800/C700 매뉴얼

PRISMAsync supports the use of calibration curves created by an external tool, for example
CHROMiX Curve3 ™. PRISMAsync uses media families to indicate which output profiles and
calibration curves must be applied to a media. Hence, the creation of a new media family with the
factory default G7 output profiles is part of this procedure. (See 

 and

• Enable G7 support in the Settings Editor. (See 

• A file with a chart intended for G7 calibration, for example the P2P25 calibration chart.

1.

Calibrate the printer. 

 (See )

IMPORTANT

You must always perform a printer calibration before you continue with this procedure.

2.

Create a G7 media family in the Settings Editor. 

1.

Open the Settings Editor.

2.

Create a new G7 media family.

3.

Create a new media for the G7 media family.

3.

Print the G7 measurement chart via an automated workflow. 

 (See )

1.

Create a new automated workflow.

2.

Select the media on which the measurement chart will be printed.

3.

At [Measurement chart printing] select [G7 calibration] to print without color management.

4.

Print the G7 measurement chart via the G7 automated workflow.

4.

Measure the calibration chart.

1.

Measure the chart, for example with an X-Rite ™ device.

2.

Calculate the calibration curves with the external tool.

5.

Import the calculated G7 calibration curves to the G7 media family in the Settings Editor.

You can only disable G7 support in the Settings Editor when all G7 media families are removed.

imagePRESS C800 Series