Canon imagePROGRAF iPF510 매뉴얼
Printing procedure
9.
Send the print job.
•
Printing from Windows (→P.91)
•
Printing from Mac OS X (→P.92)
•
Printing from Mac OS 9 (→P.94)
Start printing.
Note
•
Steps 6 and 7 are not required, if a barcode has been printed on the roll and you have activated
automatic detection of the remaining roll paper. The paper type and amount of paper left are
automatically detected.
•
Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading
edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On so that the
paper edge is automatically cut before printing.
When printing quality is most important, we recommend setting TrimEdge Reload to On so that the
paper edge is automatically cut before printing.
•
For details on supported sizes and types of the roll that can be loaded, see “Paper Sizes” or the Paper
Reference Guide. (→P.109) (→P.103)
•
Clean the platen after you have used up a roll. (→P.627)
•
When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced.
If you accidentally pull out the paper, hold the Stop/Eject button to enable feeding again.
(→P.119)
If you accidentally pull out the paper, hold the Stop/Eject button to enable feeding again.
(→P.119)
86 Basic Printing Workow