Canon imagePROGRAF iPF510 매뉴얼
Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the
following example.
If you use n A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder. (→P.139)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
following example.
If you use n A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder. (→P.139)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
Document: Any type
•
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
•
Paper: Roll
•
Paper type: Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
1.
In the application, create an original that takes up the entire space of the paper size.
Note
•
If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2.
Choose Print in the application menu.
3.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.453)
4.
Make sure the Main sheet is displayed.
5.
In the
A
Media Type list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper.
6.
Select the print target in the
E
Print Target list.
312 Enhanced Printing Options