Canon imagePROGRAF iPF510 매뉴얼
Network Setting
Conguring the Printer’s NetWare Network Settings
Follow the steps below to congure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol
Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item
Details
Default Setting
Frame Type
Specify the type of frame to
use in NetWare.
use in NetWare.
Disabled
NCP Burst Mode
Activate this setting to use
NCP Burst Mode.
This mode supports fast data
transfer when printing in queue
server mode. Normally, leave
the setting On.
NCP Burst Mode.
This mode supports fast data
transfer when printing in queue
server mode. Normally, leave
the setting On.
On
Print Application
Choose the print service.
•
Bindery PServer
•
RPrinter
•
NDS PServer
•
NPrinter
NDS PServer
Packet Signature
Select If Requested by Server
to use packet signature.
to use packet signature.
If Requested by Server
Bindery
PServer
PServer
File Server Name
Specify the name of a le
server that has a NetWare print
server.
(0-47 characters)
server that has a NetWare print
server.
(0-47 characters)
-
Print Server Name
Specify the name of a NetWare
print server.
(0-47 characters)
print server.
(0-47 characters)
-
Print Server Password
Set a password for the print
server.
(0-20 characters)
server.
(0-20 characters)
-
Polling Interval
Specify the interval to conrm
jobs.
(1-15 seconds)
jobs.
(1-15 seconds)
5
RPrinter
Print Server Name
Specify the name of a NetWare
print server.
(0-47 characters)
print server.
(0-47 characters)
-
548 Network Setting