Canon imagePROGRAF iPF510 매뉴얼
Network Setting
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
MAIN MENU
Interface Setup ↓
Interface Setup ↓
3.
Press ◄ or ► to select Ethernet Driver, and then press ▼.
Interface Setup
Ethernet Driver ↓
Ethernet Driver ↓
4.
Press ◄ or ► to select Auto Detect, and then press ▼.
Ethernet Driver
Auto Detect ↓
Auto Detect ↓
5.
Press ◄ or ► to select Off, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Auto Detect
= Off
= Off
Return to the Ethernet Driver menu.
6.
Press ◄ or ► to select Comm.Mode, and then press ▼.
Ethernet Driver
Comm.Mode ↓
Comm.Mode ↓
7.
Press ◄ or ► to select the communication mode, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Comm.Mode
= Half Duplex
= Half Duplex
Return to the Ethernet Driver menu.
8.
Press ◄ or ► to select Ethernet Type, and then press ▼.
Ethernet Driver
Ethernet Type ↓
Ethernet Type ↓
9.
Press ◄ or ► to select the Ethernet type, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Ethernet Type
= 10 Base-T
= 10 Base-T
Return to the Ethernet Driver menu.
Network Setting 551