Canon imagePROGRAF iPF510 매뉴얼
Problems Regarding Paper
Problems Regarding Paper
Clearing Jammed Paper (Paper Feed Slot)
Follow these steps to remove any scraps left in the Paper Feed Slot after you clear jammed sheets or
roll paper.
roll paper.
1.
Press the Feeder Selection button to activate the Paper Tray lamp.
2.
Press ◄ or ► to select POP Board, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Type
= POP Board
= POP Board
3.
Press ◄ or ► to select ISO A2, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Size
= ISO A2
= ISO A2
A conrmation message is displayed notifying you that the printer is changing the media source.
Please Wait..
4.
After the following message is displayed, press the OK button.
Chk Back Space
Press OK
Press OK
5.
After the following message is displayed, open the Top Cover.
Open UpperCover
6.
Fold an A4 sheet lengthwise four times and insert it through the gap of the Back Cover. Push the
scrap out toward the Platen.
7.
Remove the scrap when it is pushed out onto the Platen.
8.
If any scraps remain inside the Paper Feed Slot, repeat steps 6 and 7.
9.
Close the Top Cover.
10.
Turn the printer off. (→P.25)
640 Troubleshooting