Canon imagePROGRAF iPF510 매뉴얼
Messages regarding paper
PaprSiz Mismatch / Prnt:PressOnline
Cause
Corrective Action
1.
Hold down the Stop/Eject button for a second or
more to cancel printing.
2.
Try printing again after adjusting the paper size
as specied in the printer driver and the size
specied on the printer so that they match.
The sizes of paper specied in the printer driver and
on the printer do not match when Fit Roll Paper
Width is selected in the printer driver.
on the printer do not match when Fit Roll Paper
Width is selected in the printer driver.
Press the Online button to resume printing. However,
this may cause a paper jam or printing problem.
this may cause a paper jam or printing problem.
Paper Too Small / Please Check
Cause
Corrective Action
The loaded paper is smaller than the minimum size
supported by the printer.
supported by the printer.
Press the Online button to clear the error message.
For details on supported paper sizes, see “Paper
Sizes”. (→P.109)
For details on supported paper sizes, see “Paper
Sizes”. (→P.109)
Paper Too Large / Please Check
Cause
Corrective Action
The loaded paper exceeds the maximum size
supported by the printer.
supported by the printer.
Press the Online button to clear the error message.
For details on supported paper sizes, see “Paper
Sizes”. (→P.109)
For details on supported paper sizes, see “Paper
Sizes”. (→P.109)
Papr Size Undetected
Cause
Corrective Action
Paper has been loaded askew, or warped paper has
been loaded.
been loaded.
Reload paper straight, in the correct position.
(→P.152)
(→P.117)
(→P.155)
(→P.152)
(→P.117)
(→P.155)
Need A4/Letter Vert. or Larger
Cause
Corrective Action
Paper too small for the printer has been loaded.
Replace the paper with A4/Letter (vertical) or larger.
(→P.109)
(→P.109)
Need 10 in or Larger Roll
Cause
Corrective Action
Paper too small for the printer has been loaded.
Load a roll 10 inches wide or larger.
(→P.82)
(→P.82)
680 Error Message