Canon imagePROGRAF iPF6400S 매뉴얼

 

iPF6400S Basic Guide 

 

 

3 

Power Supply 

 

Warning 

•  Never handle the power cable with wet hands. Doing so may cause electrical shock. 
•  Insert the power cable securely and completely into the power source. If the power cable is not 

inserted completely, this could cause a fire or electrical shock. 

•  Do not use any power cable other than the one provided. This could cause a fire or electrical 

shock. Never use the power cable with any other electrical device. 

•  Never cut the power cable or attempt to modify it, and never stretch it or bend it forcefully. 

Never place a heavy object on the power cable. Damaged sections of the power cable could 

cause a short circuit and may cause a fire or electrical shock. 

•  Never connect the power cable to a power strip or any power source shared by other electrical 

devices. This could cause a fire or electrical shock. 

•  Never knot the power cable or wrap it around itself. This could cause a fire or electrical shock.
•  Periodically disconnect the power cable and use a dry cloth to wipe away dust that has 

collected on the plug and the area around the power outlet. Leaving the power cable plugged in 

and not cleaned for a long period, especially in an area subject to dust, oil, and humidity, could 

cause the insulation material to deteriorate and lead to a fire. 

 

 

Caution 

•  Always grip the plug to remove the power cable from the power outlet. Pulling on the power 

cable could damage the cable and lead to a fire or electrical shock. 

•  Never use an extension cord. This could cause a fire or electrical shock. 
•  Never use any power source other than 100–120 / 220–240 V AC. This could cause a fire or 

electrical shock. The printer operating conditions are described below. Use the printer under 

the following conditions. 

Power supply voltage: 100–120 / 220–240 V AC 

Power supply frequency: 50/60 Hz 

 

In an Emergency 

 

Warning 

•  If the printer emits smoke or strange odors, continuing to use the printer may cause a fire or 

electrical shock. Switch the printer off immediately and remove the power plug from the power 

outlet. Contact the nearest service center. 

 

Cleaning the Printer 

 

Warning 

•  For cleaning, use a cloth dampened in water. Never use flammable solvents such as alcohol, 

benzene, or thinner. If these substances come into contact with electrical components inside 

the printer, there is a risk of fire or electrical shock. 

 

 

Caution 

•  Always disconnect the power cable from the outlet before cleaning the printer. If the printer is 

switched on accidentally, moving parts inside the printer may cause personal injuries. 

 

Pacemakers 

 

Warning 

•  This printer generates a low-level magnetic field. Anyone wearing a pacemaker who 

experiences discomfort while working around the printer should leave the area. Consult a 

physician before continuing to work around the printer.