Canon imagePROGRAF iPF850 매뉴얼
Sheet removed.
Sheet removed.
Cause
Corrective Action
A sheet has come out of
the printer during printing.
the printer during printing.
1.
Lift the Release Lever and remove the paper.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
the OK button.
Printing will resume, starting from the page on which the error occurred.
Sheet printing is selected.
Sheet printing is selected.
Cause
Corrective Action
You have attempted to print on a sheet, but
no sheet is loaded.
no sheet is loaded.
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet,
and then print.
(See "
and then print.
(See "
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Regular printing is selected, but a roll is loaded.
Regular printing is selected, but a roll is loaded.
Cause
Corrective Action
A print job for printing on
sheets was sent when a roll is
loaded.
sheets was sent when a roll is
loaded.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have speci-
fied in the printer driver.
(See "
fied in the printer driver.
(See "
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Paper jam.
Paper jam.
"Lift the release lever."
Cause
Corrective Action
A paper jam occurred
in the printer during
printing.
in the printer during
printing.
1.
Lift the Release Lever and remove the jammed paper.
(See "
(See "
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
OK button.
Printing will resume, starting from the page on which the error occurred.
"Manually rewind the roll all the way and press OK."
Cause
Corrective Action
A paper jam occurred
when advancing the pa-
per.
when advancing the pa-
per.
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
the OK button.
Printing will resume, starting from the page on which the error occurred.
"Lift the release lever and remove the paper."
Cause
Corrective Action
A paper jam occurred in the printer during printing. Lift the Release Lever and remove the jammed paper.
iPF850
Sheet removed.
Error Message
Messages regarding paper
659