Canon PIXMA MX522 매뉴얼

다운로드
페이지 4
2
1
2
1
7
5
2
4
8
6
3
1
2
Inserte el cartucho FINE (FINE 
Cartridge) hasta que se detenga.
 ¡No lo golpee contra los lados!
44
Si aparece un mensaje 
de error, compruebe 
que los cartuchos FINE 
(FINE Cartridges) están 
instalados correctamente.
Cierre la tapa de salida del papel.
Espere aproximadamente de 1 a 2 
minutos hasta que desaparezca la 
pantalla y continúe.
77
Tenga cuidado con la tinta de la cinta 
protectora.
Desembale el cartucho FINE 
(FINE Cartridge) y retire la cinta 
protectora.
33
Abra la bandeja de salida del papel 
y la tapa de salida del papel.
11
Baje la palanca de bloqueo del cartucho de tinta.
22
Insértelo recto hasta que se detenga.
Levante la palanca de bloqueo del 
cartucho de tinta.
55
 ¡No tocar!
Cuando aparezca esta pantalla, 
pulse el botón 
OK.
88
Repita de   a   para instalar 
el otro cartucho FINE (FINE 
Cartridge).
66
Compruebe que la cubierta 
del cabezal se ha abierto 
automáticamente.
Si la cubierta del cabezal está cerrada, 
cierre la tapa de salida del papel y 
vuelva a abrirla para abrir la cubierta 
del cabezal.
A la izquierda debe instalarse el cartucho FINE (FINE Cartridge) de color y a la derecha debe instalarse el cartucho 
FINE (FINE Cartridge) negro.
Insert the FINE Cartridge until it 
stops.
 Do not knock it against the sides!
44
If an error message 
appears, check that the 
FINE Cartridges are 
installed correctly.
Close the Paper Output Cover.
Wait for about 1 to 2 minutes until this 
screen disappears, then proceed.
77
Be careful of ink on the protective tape.
Unpack the FINE Cartridge, then 
remove the protective tape.
33
Open the Paper Output Tray and 
the Paper Output Cover.
11
Lower the Ink Cartridge Lock Lever.
22
Insert it straight until it stops.
Lift the Ink Cartridge Lock Lever.
55
 Do not touch!
When this screen is displayed, 
press the 
OK button.
88
Repeat   to   to install the other 
FINE Cartridge.
66
Check that the Head Cover has 
opened automatically.
If the Head Cover is closed, close the 
Paper Output Cover and open it again 
to open the Head Cover.
The left is where the Color FINE Cartridge is to be installed and the right is where the Black FINE Cartridge is to be 
installed.